Home > Products > PTFE Pure & Compounded Rod

  PVDF
  PCTFE
  Marine Service Teflon
  PTFE Teflon Sheet
  PTFE Pure & Compounded Rod
  PTFE Tube Pipe
  PTFE Teflon Gaskets
  Customize PTFE Shaped Parts
  Series Fillers Moulded PTFE Prod
  Filled Grade PTFE Resin
  PTFE Gasket Tape
  PTFE Coated Fiberglass Fabric
  Pure PTFE Adhesive Tape
  UHMW-PE Products
  PI (Polyimide)
  PEEK
  Silicone Coated Fiberglass Cloth
  PTFE Machines
  Products
 
Pure PTFE Teflon Rods

 

There are three kinds of PTFE rods to offer.One is manufactured by paste extruding method in the diameter from 2 to 4mm and the other is made by ram extruding method in the diameter from 5 to 120mm;rods over the diameter 55 to 300mm are manufactured by moulding . PTFE is the most chemical-resistant and the best dielectric of all known plastics.It is not aging and binding.It can be used from﹣180℃﹣﹢260℃ under no burthen circumstances .PTFE has the lowest coefficient of friction of all known solid material

Specification

Types
             Diameter(mm)
Length(mm)
pressed rod
2~4
produced under requirements
extruded rod
5~120
500~3000
die pressed rod
25~300
100~300

Main properties:

Properties
unit
Result
Apparent density
g/cm 3
2.10~2.30
Tensile strength(min)
MPa
14.0
Crack elongation(min)
140

Application
Electrical insulation,seal,anti-sticking materials .
 
 

Copyright 2012 © Qingdao Mainflon New Materials Co.,Ltd. All Rights Reserved
Http://www.mainflon.com  Http://www.goodptfe.com